Mesa, AZ · ROC 334857 · ROC 334785 · Licensed, Bonded & Insured
Serving Customers in Mesa & Surrounding Areas
Serving Mesa & the East Valley
Level 2 home charging installed safely and to code by a Tesla certified EV charger installer and licensed electrical team based in Mesa.
Contact us today for a free consultation and let our experts bring your vision to life.
EV charger installation is the fastest way to turn your garage into your own fueling station. Plugging an electric vehicle into a standard outlet works, but it is slow, and a properly installed Level 2 charger lets most drivers start every morning with the range they need.
JBEE Industries is a Tesla certified installer for EV chargers, and a licensed, bonded and insured electrical contractor. We install home EV chargers across Mesa and the East Valley, and we start every job by making sure your electrical system can support the charger safely.
Level 1 charging uses a regular 120 volt household outlet and the cord that comes with many vehicles. It adds only a few miles of range per hour, which can be fine for short commutes but falls behind quickly for longer drives or a second EV.
Level 2 charging runs on 240 volts, the same kind of power a dryer or electric range uses. It charges many times faster than Level 1 and is how most EV owners charge at home. A Level 2 charger can be hardwired to the wall or plugged into a heavy duty 240 volt outlet, and we will help you choose the setup that fits your vehicle and garage.
A Level 2 charger draws a large amount of current for hours at a time, so it needs its own dedicated circuit. It cannot safely share a circuit with garage outlets, a freezer or a washer. Electrical code also treats EV charging as a continuous load, which means the circuit and breaker have to be sized larger than the charger’s rated current. For example, a charger that draws 48 amps needs a 60 amp circuit.
That is why the first thing we look at is your panel. We check whether you have enough spare capacity and an open space for a new breaker. In many Mesa homes there is room, and installation is simply a new circuit from the panel to the charger.
In other homes, especially older ones with 100 amp service or homes already running two air conditioners, the panel is at its limit. In that case the answer may be a panel upgrade before the charger goes in. Some chargers can also be set to charge at a lower amperage or share power with other loads, which can sometimes avoid an upgrade. We will explain the tradeoffs and let you decide.
JBEE Industries is a Tesla certified installer for EV chargers, and we bring the same care to every home charger we install. Whatever you drive, the fundamentals are the same: a correctly sized circuit, proper wire and breaker, a solid ground, and a clean installation that is tested before we leave.
Our Tesla certification also covers home battery backup, so it is something we install too. A battery pairs well with EV charging and solar, and it can be added with solar or on its own. If you are thinking about a battery, ask about it during your estimate, or read our home battery backup installation page.
Because we also handle solar and HVAC, we can look at your charger in the context of the whole home. If you have or are planning solar panels, or you plan to add a heat pump, we will size the circuit and panel with those in mind so you are not paying for electrical work twice.
It also pays to think one car ahead. If a second electric vehicle is likely down the road, tell us during the estimate. Planning the circuit, panel capacity and charger location for two cars now is usually simpler than reworking the installation later.
We start with a visit to see your panel, your garage or parking spot, and the route between them. Then you get a free estimate with upfront pricing, including anything your panel needs. There are no surprises once the work starts.
EV charger installation cost depends mostly on your panel and on distance. A charger mounted a few feet from a panel with spare capacity is a straightforward job. A charger on the far side of the house, a detached garage, or a panel that needs an upgrade adds to the scope.
We do not quote blind. We come out, look at your setup, and give you a free estimate with upfront pricing. Financing options are available if your project includes a panel upgrade.
Straight answers from our team. Don’t see yours?
Licensed electrician in Mesa, AZ for repairs, panel upgrades, EV chargers and surge protection. Family owned, upfront pricing. Get a free estimate.
Electric panel upgrade and replacement in Mesa, AZ. More capacity for AC, EV chargers and solar, upfront pricing. Request your free estimate today.
Whole house surge protector installation in Mesa, AZ. Help protect your AC, appliances and electronics from surges at the panel. Get a free estimate.
Local, professional, and customer-focused, JBEE Industries is the team Mesa and East Valley residents trust for dependable comfort solutions.
Based on South Horne in Mesa, serving homeowners throughout the East Valley.
Tell us about your vehicle and your garage, and we will check your panel and give you a free, upfront estimate from a Tesla certified installer.
