Mesa, AZ · ROC 334857 · ROC 334785 · Licensed, Bonded & Insured
Serving Customers in Mesa & Surrounding Areas
CALL OR TEXT
Older home wiring
Old Wiring Out.
Safe Power In.

Home Rewiring in Mesa, AZ

JBEE Industries rewires older Mesa homes, replacing brittle original wire, ungrounded two prong circuits and aluminum branch wiring with new grounded copper. Our licensed electricians can rewire one problem circuit, a single room or a whole section of the house, and run new wiring for kitchens, additions and dedicated appliance circuits. You get a clear scope and a written price before we open a wall, plus financing options on bigger projects. Homes from Dobson Ranch to Gold Canyon fall inside our service area.
Older electrical panel with labeled breakers
Rewire in stages?
Yes. Start with the circuits causing trouble and plan the rest around your budget and calendar.
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
When repairs keep stacking up

Rewiring Fixes the Cause Instead of Chasing Symptoms

If you have paid for three outlet repairs in the same hallway, or one breaker in a 1970s panel trips every summer afternoon, the wire itself is often the weak link. Insulation dries out after decades in a hot attic, splices work loose, and old additions leave mystery junctions buried behind drywall.
New wiring gives every circuit a real ground, the correct wire size for its breaker, and modern connections in boxes you can reach. It also makes room for what Mesa homes run today: two AC systems, a pool pump, an EV charger and a home office full of electronics.
Meter, disconnects and breaker panel on an exterior wall
Aluminum branch wiring

Built Between 1965 and 1973? Check for Aluminum Wire

Builders across the Valley used aluminum branch circuits in that window to save on copper. Aluminum expands and contracts more than copper does, so the joints at outlets, switches and splices loosen with every heat cycle and can overheat long before anything looks wrong.
There are two sound fixes: replace the aluminum runs with new copper, or remediate each joint with connectors listed for joining aluminum to copper. We judge the condition of the wire and count the circuits involved, then price both routes so you can choose.
How we confirm aluminum wiring
01
Read the markings printed along the wire jacket
02
Open several outlets and switches in different rooms
03
Look at branch conductors inside the panel
04
Check whether devices carry a CO/ALR rating
Signs the wiring is wearing out

When Does an Older Home Need New Wiring?

Age alone does not decide it. The symptoms below tell us how much of the house needs work and how soon it should happen.
Stop and call now
Burning smell, no clear source
Overheated insulation inside a wall or box smells like hot plastic. Turn off the suspect circuit and call.
Stop and call now
Outlets hot to the touch
Often a loose aluminum or backstabbed joint. Stop using that receptacle until it has been opened and checked.
Schedule an evaluation
Same breaker trips weekly
The circuit is overloaded, damaged or simply undersized for what it feeds now.
Schedule an evaluation
Lights dim in several rooms
Shared neutrals and worn splices tend to show up as dimming whenever one appliance starts.
Plan the rewire
Two prong outlets throughout
No ground wire means surge strips and three prong appliances run without protection.
Plan the rewire
House built before 1975
Original wire may still work, but it deserves an evaluation before a remodel, a sale or new electronics.
Partial or whole home

Rewire One Section or the Entire House?

Partial rewiring

Whole-home rewiring

Not sure which fits? We test the wiring first, then price both scopes side by side.
How a rewiring project runs

From Wire Survey to a Tested, Grounded Home

01

Survey the wiring

We open sample boxes, check the panel and map which circuits feed which rooms.
02

Scope and written price

You choose partial or whole-home work and approve the price before anything is cut.
03

Pull new copper

Licensed electricians fish new wire through attics and walls with as few openings as practical.
04

Test and walk through

Each circuit is checked for ground and polarity, and we show you the updated breaker labels.
New wiring for new plans

Kitchens, Additions and Dedicated Appliance Circuits

Rewiring is not only for failing wire. A kitchen remodel, a garage turned into a gym or a new casita all need circuits sized for what will run there. We pull dedicated lines for ranges, microwaves, laundry, pool equipment and mini split heads, so one appliance is not fighting another for the same breaker.
Because JBEE handles HVAC and solar as well as electrical, we can size the wiring now for a future heat pump, a home battery or an EV charger, instead of opening the same walls again a couple of years from now.
Questions we ask before new wiring
01
What will run in the space, now and later
02
Which walls and ceilings we can reach from above
03
Whether the panel has spare capacity
04
If HVAC, EV or solar work is coming soon
FAQ

Rewiring Questions We Answer in Mesa

Repeated breaker trips, warm outlets, flickering in several rooms, two prong receptacles and aluminum branch wire are the usual clues. A home over 40 years old with original wiring is worth evaluating even without symptoms. We test the circuits and tell you whether a partial or full rewire makes sense.

The aluminum carries power fine, but its connections loosen and overheat more readily than copper. That is why a home with it needs either copper replacement or listed connectors at every outlet, switch and splice.

Usually not. Work moves section by section, and we tell you ahead of time when power to a part of the house will be off so you can plan around it.

Electricians fish new wire through attics and existing cavities to keep openings small, but some access holes in drywall are normal. We point them out during the estimate so patching is planned, not a surprise.

The price depends on square footage, how many circuits change, attic access, wall finishes and whether the panel is replaced too. We look at the house and give you a free estimate in writing, and financing options are available for larger jobs.

Most rewiring calls for an electrical permit and a city inspection in Mesa and the surrounding cities. Bring it up during your estimate so the schedule allows time for the inspection.

Yes. We rewire a single circuit, one room or a larger section of an older home, and many owners start with the area causing trouble. Add a panel upgrade if the old panel is also at its limit.

If the existing wire is aluminum, ungrounded or already overloaded, fixing it first is usually the smarter order. We plan the circuits around the new equipment, whether that is solar or a heat pump.

The price depends on square footage, how many circuits change, attic access, wall finishes and whether the panel is replaced too. We look at the house and give you a free estimate in writing, and financing options are available for larger jobs.

Most rewiring calls for an electrical permit and a city inspection in Mesa and the surrounding cities. Bring it up during your estimate so the schedule allows time for the inspection.

Yes. We rewire a single circuit, one room or a larger section of an older home, and many owners start with the area causing trouble. Add a panel upgrade if the old panel is also at its limit.

If the existing wire is aluminum, ungrounded or already overloaded, fixing it first is usually the smarter order. We plan the circuits around the new equipment, whether that is solar or a heat pump.

Living with old wiring?

Get a Straight Answer on Rewiring Your Home

Call (480) 618-6969 or send the form with your home’s age and what you have noticed. A licensed electrician looks at the wiring and the panel, then prices partial and whole-home options in writing, with no pressure to do more than the house needs.
Mesa
Scottsdale
Gold Canyon
Phoenix

Request a Rewiring Estimate

Include the year your home was built if you know it.
Get Your Free Estimate