Mesa, AZ · ROC 334857 · ROC 334785 · Licensed, Bonded & Insured
Serving Customers in Mesa & Surrounding Areas
CALL OR TEXT
One thermostat, too many rooms
Every Room
at Its Own Temperature.

Multi-Zone Cooling Systems in Mesa, AZ

JBEE Industries designs and installs multi-zone cooling systems for larger Mesa homes where one thermostat cannot keep every room comfortable. We size each zone with a room by room load calculation, then recommend the right fit: a ductless multi-zone mini split, a zoned ducted system with motorized dampers, or a mix of both for a casita, garage or second story. Our own licensed electricians handle the dedicated circuits. Upfront written pricing, financing options and help with SRP and APS rebates.
Two ductless outdoor units along the side of a home
Upstairs always 5 degrees hotter?
That is a design problem, not a thermostat setting. Zoning is how you solve it.
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
Why big homes have hot rooms

One System, One Thermostat, and a House That Is Not One Temperature

A single thermostat in the hallway only knows the temperature of the hallway. Meanwhile the west facing bedroom bakes in the afternoon sun, the open kitchen and great room soak up heat from the windows, and the upstairs loft runs warm because hot air rises.
In a two story home in Eastmark or a sprawling single level in Las Sendas, that adds up to a family fighting over the thermostat and an AC that overcools half the house to rescue the other half. Zoning splits the house into areas that each get their own control, so cooling goes where people actually are.
Mini split indoor head in an open kitchen and living room
Ductless multi-zone

One Outdoor Unit, Several Indoor Heads, Separate Control in Each

A multi-zone mini split connects up to several indoor heads to a single outdoor heat pump. Each head has its own remote or app control, so a converted garage, a home office and a primary suite can each hold a different setpoint without touching the rest of the house.
Because there are no ducts, there is no duct leakage into a 140 degree attic, which is where a lot of cooling disappears in East Valley homes. The same outdoor unit also heats on cool desert winter nights, so one system covers both seasons for the rooms it serves.
Mini split indoor head cooling a converted garage
Do you need zoning?

Signs a Single-Zone System Is Not Enough for Your Home

None of these are emergencies, but each one costs comfort or money every summer. Here is where zoning usually pays off first.
Worth fixing this summer
Upstairs never cools down
First rule out a failing system or low charge. If it runs fine, the house needs a second zone.
Worth fixing this summer
Big temperature swings room to room
Thin attic insulation and leaky ducts make zoning harder. We look at both together.
Good candidate for zoning
A garage or casita with no cooling
A ductless head on its own zone cools a converted space without touching the main system.
Good candidate for zoning
Thermostat battles at home
Separate zones let each part of the house hold its own setpoint.
Good candidate for zoning
High bills with rooms nobody uses
Cooling guest rooms all day wastes energy. Zoning lets them coast.
Plan with your next system
Old system due for replacement
Replacement is the cheapest moment to add zoning, since the equipment is being sized anyway.
Two ways to zone

Ductless Multi-Zone or Zoned Ductwork?

Ductless multi-zone fits best when

Zoned ductwork fits best when

Many homes end up with a bit of both. We lay out the options and price them in writing.
From walkthrough to startup

How a Multi-Zone Project Comes Together

01

Walk the house

We look at every room, the attic, the ducts and the electrical panel with you.
02

Draw the zones

A load calculation sets how many zones you need and what size serves each one.
03

Install and wire

Our HVAC crew and licensed electricians set equipment, lines and dedicated circuits.
04

Balance every zone

Each zone is tested for airflow, temperature and control before we hand it over.
Design before equipment

How We Lay Out a Zoned System That Actually Balances

Zoning only works when each zone is sized for its real load. We measure rooms, note window direction and glass area, check attic insulation, and run a load calculation before we suggest how many zones you need or what size equipment serves them.
Then the electrical side gets planned too. Our licensed electricians confirm panel capacity and run dedicated circuits, so you are not hiring a second contractor or finding out mid-install that the panel is full. You get one written quote that covers the whole job.
What goes into a zoning plan
01
Square footage, ceiling height and window direction per room
02
Attic insulation levels and existing duct condition
03
Which rooms are used when, day and night
04
Available panel space for new dedicated circuits
FAQ

Questions About Zoned Cooling in the East Valley

It splits a home into areas, each with its own thermostat or remote, so every zone can hold its own temperature. It can be a ductless mini split with several indoor heads, ducted equipment with motorized dampers, or a combination.

It depends on the floor plan, sun exposure and how you use the rooms. Two story homes often start with one zone per floor, while ductless setups may give each main room its own head. A load calculation settles it.

Usually, because you stop cooling rooms nobody is in and avoid overcooling one area to rescue another. Ductless zones also avoid losses from ducts running through a hot Arizona attic. Savings depend on the home and how you set it.

Sometimes. If the ductwork and equipment are in good shape, dampers and a zone control panel may be added. If the ducts are undersized or the unit is old, a ductless head for the problem area is often simpler.

Cost depends on the number of zones, the equipment, line set lengths, any electrical work and rebates. Every quote is written and itemized before work begins, and our mini split installation page covers the equipment options. Financing options are available.

Yes. The outdoor unit is a heat pump, so the same system cools in July and heats on chilly winter nights. Read heat pump vs. air conditioner in Arizona for how that compares.

High efficiency heat pumps and mini splits can qualify for SRP, APS or Efficiency Arizona incentives. JBEE is an approved Efficiency Arizona rebate contractor and helps with the paperwork. See current rebates.

Cost depends on the number of zones, the equipment, line set lengths, any electrical work and rebates. Every quote is written and itemized before work begins, and our mini split installation page covers the equipment options. Financing options are available.

Yes. The outdoor unit is a heat pump, so the same system cools in July and heats on chilly winter nights. Read heat pump vs. air conditioner in Arizona for how that compares.

High efficiency heat pumps and mini splits can qualify for SRP, APS or Efficiency Arizona incentives. JBEE is an approved Efficiency Arizona rebate contractor and helps with the paperwork. See current rebates.

Tired of hot and cold rooms?

Get a Zoning Plan Built Around Your Home

Tell us which rooms run hot and how your household uses them. A JBEE technician walks the house, plans the zones and gives you a free, written estimate for the HVAC and the electrical in one place. Or call (480) 618-6969 to talk it through.
Mesa
Scottsdale
Gold Canyon
Phoenix

Request a Zoning Consultation

List the rooms that never feel right. It helps us plan the visit.
Get Your Free Estimate