Mesa, AZ · ROC 334857 · ROC 334785 · Licensed, Bonded & Insured
Serving Customers in Mesa & Surrounding Areas
CALL OR TEXT
Solar, battery and EV together
Solar, Battery, EV.
One Panel. One Plan.

Solar Electrical Integration in Mesa, AZ

JBEE Industries connects solar panels, home batteries, EV chargers and your main electrical panel into one system that works together for Mesa and East Valley homes. Our Home Electrical + Solar Integration Package starts with a load calculation and a look at your service, busbar and main breaker, then plans the panel upgrade, battery circuits, backed up loads and Level 2 charger as one design. Our own licensed electricians do the wiring, so there is no handoff between a solar crew and a separate electrician.
Home battery cabinets and electrical equipment on an exterior wall
Already have solar?
We look at what is on the roof and the wall today, then plan the battery, EV and panel work around it.
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
Where most add-ons go wrong

Solar, Batteries and EV Chargers All Compete for the Same Panel

Every new piece of equipment lands on your main panel. Solar backfeeds it, a battery needs its own breaker and often a backed up loads subpanel, and a Level 2 charger can pull 40 amps or more for hours. Added one at a time by different companies, they can push a 100 or 200 amp panel past what its busbar allows.
Planning them together lets us size the service once, choose between a panel upgrade, a supply side connection or load management, and keep space open for the next addition. You avoid paying to open the same wall twice.
What the integration plan covers
01
Service size, busbar rating and main breaker
02
Solar interconnection point and breaker
03
Battery, gateway and backed up circuits
04
EV charger circuit and load management
Keep the AC running in an outage

Choosing What Your Battery Should Carry in an Arizona Summer

A summer outage in Mesa is mostly about the air conditioner. Whether a battery can start and run your AC depends on the compressor’s starting current, the battery’s output and how many other circuits share it. Because JBEE services HVAC too, we look at the condenser itself, not only the panel.
Most homes back up a short list: the refrigerator, lights, internet, a few outlets and, when the system allows, one cooling zone. We go through the tradeoffs before anything is installed, so you know what stays on and what goes dark.
Questions that shape a battery design
01
Which rooms must stay cool during an outage
02
How long outages tend to last on your street
03
Whether you want stored solar after sunset
04
How your AC starts and what it draws
Signs you need a plan, not a part

When Should Solar, Battery and EV Work Be Planned Together?

If two or more of these apply to your home, one integration plan usually saves rework compared with solving them one at a time.
Fix before adding more
Solar breaker hot or tripping
A backfed breaker that runs hot or trips points to a loose connection or a panel pushed past its rating.
Fix before adding more
Panel full of tandem breakers
No open spaces means a battery or charger cannot go in without changes to the panel.
Plan this season
New EV on order
A charger added to a panel that already carries solar needs a load check first.
Plan this season
Outages during monsoon storms
If storms keep cutting power, a battery that works with your existing solar is the logical next step.
Plan for later
Switching from gas to a heat pump
Electric heat and an induction range add load the panel must cover alongside solar.
Plan for later
Adding panels to an older array
More solar means more backfeed, so the panel and interconnection get checked before expanding.
Piece by piece or all at once

Add Equipment One Job at a Time, or Plan It Once?

One job at a time

One integration plan

You can still phase the work over time. The difference is that every phase follows the same plan.
How integration works with JBEE

From Load Calculation to a System That Works as One

01

Walk the property

We look at the meter, panel, solar equipment, garage and AC to see what is there today.
02

Run the load math

A load calculation shows what the service can carry once solar, a battery and an EV are added.
03

Design and price

You get one plan and a written price, split into phases if you prefer.
04

Install and commission

Our licensed electricians wire and test everything, then show you how each piece works together.
Rebates and financing

Making a Bigger Electrical Project Easier to Fund

An integration project can cover several pieces at once, so cost is a fair concern. Financing options are available, and we can price phases separately if you would rather spread the work out.
JBEE is an approved Efficiency Arizona rebate contractor and helps homeowners pursue SRP and APS rebates where a program applies to their equipment. We point out which incentives are worth checking before you commit.
Before you sign for any add-on
01
Ask whether the panel can carry it
02
Ask who does the electrical work
03
Ask how it affects future additions
04
Get the full price in writing first
FAQ

Solar and Electrical Integration Questions

It means designing how solar, a home battery, an EV charger and your electrical panel connect, so each piece is sized for the others. JBEE offers it as a Home Electrical + Solar Integration Package, planned by our licensed electricians.

Not always. The busbar rating, the main breaker and your current load decide it. A load calculation shows whether you need an upgrade, a different interconnection method or load management. Compare the options on our panel upgrade page.

Sometimes. It depends on the AC starting current, the battery output and what else is backed up. Since we work on both HVAC and electrical, we check both sides before promising anything.

Yes. The charger draws from the panel, and daytime solar offsets that use. Charging during sunny hours, or storing midday power in a battery, stretches it further. Our EV charger installation page covers the circuit itself.

Adding storage generally means updating the interconnection with your utility, so it is part of the planning from the start rather than an afterthought.

Yes. We can review an existing array and plan a battery, EV charger or panel upgrade around it. Compatibility depends on the inverter and other equipment, so we confirm it on site first.

Yes, financing options are available, and the work can be split into phases under one plan. Ask about rebates from SRP, APS and Efficiency Arizona as well.

Adding storage generally means updating the interconnection with your utility, so it is part of the planning from the start rather than an afterthought.

Yes. We can review an existing array and plan a battery, EV charger or panel upgrade around it. Compatibility depends on the inverter and other equipment, so we confirm it on site first.

Yes, financing options are available, and the work can be split into phases under one plan. Ask about rebates from SRP, APS and Efficiency Arizona as well.

Growing your electric load?

Plan Your Home Electrical and Solar Upgrades Together

Call (480) 618-6969 or send the form with the equipment you have now and what you want to add. A licensed electrician reviews your panel, plans the pieces as one system and gives you a written price before any work starts.
Mesa
Scottsdale
Gold Canyon
Phoenix

Request an Integration Estimate

List your current equipment and what you plan to add.
Get Your Free Estimate