Mesa, AZ · ROC 334857 · ROC 334785 · Licensed, Bonded & Insured
Serving Customers in Mesa & Surrounding Areas
CALL OR TEXT
Cooling and heating from one system
Cool Summers. Warm Winters.
One Outdoor Unit.

Heat Pump Installation in Mesa, AZ

JBEE Industries installs heat pumps for Mesa homeowners who want one efficient electric system to handle 110 degree summers and chilly desert mornings. We size the unit to your home’s cooling load, check that your electrical panel can carry it, and quote the job in writing before anything is ordered. Rebates matter on this upgrade, and our Efficiency Arizona approval lets us walk you through SRP and APS programs for qualifying units. Free estimates and financing across Mesa, Gilbert, Chandler and Queen Creek.
Bosch outdoor air conditioner condenser on a paver patio
Rebate help included
Ask during your free estimate which heat pump models qualify for Efficiency Arizona, SRP or APS programs.
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
Why heat pumps fit Mesa

Built for a Climate With Long Summers and Short Winters

A heat pump is an air conditioner with a reversing valve. In summer it pulls heat out of the house like any AC. On a 38 degree January morning it runs the other direction, gathering heat from the outdoor air and moving it inside, using far less electricity than electric strip heat.
That trade works in your favor here. East Valley winters are mild, so the heating side runs efficiently for most of the season, and you have one outdoor unit to maintain instead of an AC plus a separate furnace. Variable speed models add quieter operation and steadier room temperatures on both ends of the year.
Outdoor air conditioner condenser on a pad next to a grass lawn
Sizing for the hard season

We Size It for July, Then Check It for January

In Mesa, a heat pump spends most of its life cooling, so cooling capacity sets the size. We run a load calculation that accounts for attic insulation, west facing windows, ceiling height and duct leakage, then confirm the same unit covers your heating needs on the coldest nights.
Getting this right keeps the system from short cycling in spring and struggling through a long stretch of triple digit afternoons. It is also where we decide whether backup heat strips make sense for your home or are simply extra cost.
What drives the size of your heat pump
01
Square footage, ceiling height and layout
02
Attic insulation and window orientation
03
Duct leakage and return air capacity
04
How warm or cool you keep the house
Good time to switch?

Situations Where a Heat Pump Makes the Most Sense

A heat pump is not right for every home. These are the moments when it usually pencils out for East Valley homeowners.
Strong candidate
AC and furnace both aging
Replacing two old systems with one heat pump often costs less than buying a new AC and a new furnace separately.
Strong candidate
Electric strip heat today
Resistance heat is expensive to run. A heat pump delivers the same warmth for a fraction of the electricity.
Worth pricing
Furnace needs a major repair
Before paying for a heat exchanger or inducer motor, price a heat pump next to a new furnace.
Worth pricing
Adding or already have solar
An all electric system lets your panels offset heating as well as cooling. We plan both from one company.
Plan ahead
Want to drop the gas bill
Pair the heat pump with attic insulation and duct sealing to get the most out of the switch.
Plan ahead
One room still uncomfortable
A ductless heat pump can handle a single addition or casita without changing the main system.
Heat pump or split system with gas

All Electric Heat Pump, or an AC Paired With a Furnace?

Heat pump

AC plus gas furnace

Already have gas and like it? We will price a dual fuel setup too, so you can compare every option on paper.
Heat pump install, step by step

From Load Calculation to Tested in Both Modes

01

Assess the home

We measure the load, inspect the ducts and check panel capacity during a free visit.
02

Choose the system

You compare models, efficiency levels and rebate eligibility on a written quote.
03

Install and wire

Our crew sets the equipment and our electricians handle the circuit and any panel work.
04

Test cooling and heat

We run the system in both modes, verify readings and set up the thermostat with you.
The electrical side

One Company for the Heat Pump and the Panel Behind It

A heat pump replaces gas heat with electric heat, which can add load to an older panel. Many HVAC companies have to send you to a separate electrician for that. JBEE has its own licensed electricians, so the panel check, the dedicated circuit and the disconnect are part of one estimate and one install.
If you have solar or are planning it, we also look at how the new system fits your production and your SRP or APS rate plan. Heat pumps pair well with rooftop solar because both the heating and cooling run on electricity you can generate yourself.
Electrical items we confirm before install
01
Available amperage in your main panel
02
Breaker size the new equipment calls for
03
Condition of the existing disconnect and whip
04
Room for future solar, battery or EV circuits
FAQ

Before You Switch to a Heat Pump: Common Questions

They do, provided the unit fits the house. In cooling mode a heat pump works the same way a central air conditioner does, so a properly sized unit handles 110 degree afternoons. Sizing and duct condition matter more than the equipment type.

Yes. One heat pump provides both heating and cooling, so it can replace a separate air conditioner and furnace. Homeowners who want to keep gas can choose a dual fuel setup instead.

Because a heat pump works in both seasons, it logs more hours than an air conditioner alone. Regular service each spring and fall is the biggest factor in how long it lasts, and our heating maintenance visit covers the heating side.

Qualifying equipment may be eligible for Efficiency Arizona, SRP or APS rebates. JBEE is an approved Efficiency Arizona rebate contractor and helps you check eligibility before you buy. Current programs are listed on our rebates page.

Sometimes, especially in older homes or homes switching from gas heat. We look at the panel on the first visit, and if it needs more capacity, that work is priced on the same estimate as the heat pump.

System size, efficiency rating, ductwork condition and any electrical work all move the price. You get a free estimate with an upfront, written number, and financing options are available.

Not generally. Outdoor sound is similar to a comparable AC, and variable speed models are often quieter because they run at low speed most of the time.

Sometimes, especially in older homes or homes switching from gas heat. We look at the panel on the first visit, and if it needs more capacity, that work is priced on the same estimate as the heat pump.

System size, efficiency rating, ductwork condition and any electrical work all move the price. You get a free estimate with an upfront, written number, and financing options are available.

Not generally. Outdoor sound is similar to a comparable AC, and variable speed models are often quieter because they run at low speed most of the time.

Thinking about going electric?

Get Your Heat Pump Sized and Priced by JBEE

Call (480) 618-6969 or use the form to set up a free visit. We will size the heat pump, check your panel, look up rebates and give you a written price with no pressure attached.
Mesa
Scottsdale
Gold Canyon
Phoenix

Request a Heat Pump Estimate

Tell us your city and what heats your home today.
Get Your Free Estimate