Mesa, AZ · ROC 334857 · ROC 334785 · Licensed, Bonded & Insured
Serving Customers in Mesa & Surrounding Areas
CALL OR TEXT
Electrical work for businesses
Keep the Power On
and the Doors Open.

Commercial Electrician in Mesa, AZ

JBEE Industries is a licensed commercial electrician in Mesa, AZ for business owners and property managers who cannot afford a dark storefront or a dead circuit. We troubleshoot tripping breakers and failed outlets, add dedicated circuits for new equipment, upgrade panels, retrofit interior lighting and install surge protection. Because we also service commercial HVAC and refrigeration, we understand the motors and compressors that pull the heaviest loads in your building. You get a free estimate and a written price before any work begins, anywhere in the East Valley.
JB Industries shop front in Mesa Arizona
Our shop on South Horne
This is our own storefront in Mesa. We are family owned, ROC licensed and close to your building.
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
★  5.0 ★ Google Rating
★  ROC 334857 & 334785
★  Rebate Efficiency Arizona Contractor
★  $0 Free Estimates
●  Mesa
●  Gilbert
●  Chandler
●  Tempe
●  Queen Creek
●  San Tan Valley
●  Scottsdale
●  Gold Canyon
●  Phoenix
What we wire and repair

Commercial Electrical Services Built Around Your Building

Every commercial space draws power differently. An older strip center unit on Main Street has little in common with a newer suite near Superstition Springs, and an office loaded with computers has different needs than a shop running motors all day.
We start with how you use the space, then match the work to it. That can be a single circuit for a new appliance, a lighting retrofit for a whole floor, or a panel with enough capacity for the equipment you plan to add next year.
Commercial electrical work we handle
01
Breakers that trip and outlets that fail
02
New circuits for ovens, coolers and compressors
03
Service and subpanel upgrades
04
Whole building surge protection
Finding the real fault

Intermittent Electrical Problems, Traced to the Source

The worst electrical problems come and go. Lights dim every time a rooftop unit kicks on, a breaker trips only on busy afternoons, a receptacle in the back works on Monday and not on Tuesday. Resetting and hoping just moves the outage to a worse moment.
We measure load on the circuit, check terminations for heat and test the equipment on the line until the cause is clear. Then we explain what is wrong and what it costs to fix, in writing, before we pick up a tool. Overheated wiring is a fire risk for your staff and customers, so we do not guess.
Clues that point to the cause
01
Trips at the same time each day: overload
02
Dimming when a motor starts: voltage drop
03
Warm cover plates or buzzing: loose connection
04
Random dead outlets: a failed device upstream
When to call an electrician

Which Commercial Electrical Problems Need Attention First?

A business cannot always shut down for a repair. Here is how we help owners rank what they are seeing in their building.
Unsafe: power down now
Burning smell or scorched outlet
Turn off the affected circuit if it is safe and keep people away. Heat at a device means a failed connection.
Unsafe: power down now
Part of the building lost power
A failed breaker, a loose feeder or a problem at the panel can drop a whole section of the space.
Schedule a repair
Rooftop unit start trips the breaker
Large motors draw a surge on startup. An overloaded circuit or a failing compressor can trip it.
Schedule a repair
Cooler keeps cycling off
Could be the circuit, the controls or the refrigeration system. We test all three on one visit.
Plan with us
Lights flicker or hum
Failing ballasts and old fixtures waste power. An LED retrofit usually fixes it for good.
Plan with us
Electronics fail after storms
Monsoon surges and large equipment cycling wear out boards. Panel level protection helps.
How a commercial service call works

From Your Call to a Safely Powered Building

01

Tell us what is happening

Describe the symptom, when it happens and the equipment involved.
02

Test, do not guess

We measure loads, check connections and test the equipment on the circuit.
03

Approve a written price

You see the scope and cost before any repair or upgrade starts.
04

Work around your hours

We plan timing with you so customers and staff are disrupted as little as possible.
Ready for new equipment

Add Capacity Before the New Equipment Arrives

Adding a second cooler, a kitchen line or a server rack pulls more from a panel that was sized for the original tenant. Finding that out on delivery day costs you time and sometimes a second electrician visit.
Send us the equipment specs early. We review the panel, the existing load and the circuits needed, then tell you plainly whether the current service can handle it or whether a panel upgrade makes sense. Surge protection at the panel then helps guard compressors and control boards from storm surges and equipment cycling.
Send us these before you buy equipment
01
Voltage and amperage from the spec sheet
02
Where the equipment will sit in the space
03
A photo of the panel and its label
04
The date the equipment is being delivered
Electrical, HVAC and refrigeration

One Contractor for the Biggest Loads in Your Building

In an Arizona business, the air conditioning and refrigeration usually draw more power than anything else. When a rooftop unit or a walk-in keeps shutting down, the fault can be electrical, mechanical or both, and calling two separate trades often ends with each blaming the other.
JBEE does commercial electrical, commercial HVAC and commercial refrigeration, so one visit can test the circuit and the equipment together. We talk through timing with you to keep the work from disrupting your hours, and financing options are available for larger projects.
Why one company for all three trades
01
One diagnosis for circuit and equipment
02
No finger pointing between contractors
03
Fewer repeat service calls
04
One written price for the whole fix
FAQ

What Business Owners Ask Their Commercial Electrician

Yes, an urgent electrical failure at your business is something we take on. If you smell burning or see scorch marks, turn off the affected circuit if it is safe and call (480) 618-6969. On that call, you hear honestly how soon we can get there.

Commercial work often involves larger services, heavier motor loads, longer conduit runs and stricter code requirements for occupied buildings. JBEE does both, and our commercial team also understands the HVAC and refrigeration equipment those circuits feed.

Yes. Ovens, coolers, compressors and similar equipment often need their own circuit. We check panel capacity first and tell you if an upgrade is needed before the equipment is delivered.

A large motor pulls a burst of current at startup. If the circuit is overloaded, a connection is loose or the compressor is failing, voltage sags and lights dim. We test the circuit and the unit to find which one is the problem.

For most businesses, yes. LED fixtures use less power, give off less heat for the AC to remove and last longer than older lamps and ballasts. We can retrofit fixtures or replace them, and the estimate is free.

Yes. Our electrical work is covered by Arizona ROC licenses 334857 and 334785, and the company carries bonding and insurance.

We work with businesses in Mesa, Gilbert, Chandler, Tempe, Queen Creek, San Tan Valley, Scottsdale and nearby East Valley cities from our office on South Horne.

For most businesses, yes. LED fixtures use less power, give off less heat for the AC to remove and last longer than older lamps and ballasts. We can retrofit fixtures or replace them, and the estimate is free.

Yes. Our electrical work is covered by Arizona ROC licenses 334857 and 334785, and the company carries bonding and insurance.

We work with businesses in Mesa, Gilbert, Chandler, Tempe, Queen Creek, San Tan Valley, Scottsdale and nearby East Valley cities from our office on South Horne.

Electrical trouble at your business?

Get a Licensed Commercial Electrician on the Job

Call (480) 618-6969 for anything urgent, or send the form with your business address and what is going on. We set up a free estimate and give you a written scope before work starts.
Mesa
Scottsdale
Gold Canyon
Phoenix

Request Commercial Service

Include the equipment involved if you know it.
Get Your Free Estimate